Ogawa SMART RELUXE OG6383, Руководство пользователя

Страница: 12 / 28

19 20
Can persons paying frequent visits to hospitals
because of diseases use the product?
零重力
Questions and answers(Q&A)
These persons should consult physicians
before using the product.
It is on back of the main body.
Massage is the so-called “touch-pressure stimulation”:
Muscles are compressed to relieve their tension and
promote hemokinesis. Some diseases may get
worsened because of massage.Thus, consult the
attending doctors before using the product.
To simulate the most natural massage effect, the product
is designed with a core structure allowing alternate back
massage by a left massage wheel and a right massage
wheel. During massage, the massage wheels possibly
have slightly different position on the back. That’s why
you have that feeling. It is not a fault.
Select method or below:
Select method or below:
Tilt the backrest and lower the Lower Leg/Foot massage
section
Massage the upper body only with the help of the footrest.
(Massage the feet and the upper boday separately.)
Raise the backrest and lift the Lower/Foot massage section.
Massage the upper body only with the help of the footrest.
(Massage the feet and the upper body separately.)
The body height requirement differs with the
specific body type. See the rough reference
below when using the product.
Pay attention to the following things during
moving.
For a taller person with knee bending when using the product:
For a short person difficult to touch the foot massage section:
If a person shorter than 145 centimeters or taller than
185 centimeters uses the upper body massage
function and the Lower Leg/Foot massage function of
the product at the same time, it will be possible that
his soleswill have poor contact with the foot massage
section or that his knees will need to be bent.
If the original packing box is available, make sure the
power line is not wound on the product, wind it and place
it on the seat surface. When handling the product, keep
the power line from falling off and rubbing with ground.
If the original packing box is unavailable, properly keep
other packing auxiliary materials and wrap the product
with them to avoid scratch and vibration during handling.
For convenience during moving, tilt backrest of the
product till the lowest position.
During handling, do not sit on the product.
Press ON button power on the product.
Press to make the
backrest completely tilt.
Press the button until
backrest and footrest stop
Turn off the power switch and pull out the power plug.
How about the body height requirement for
use of the product?
Where is serial number of the product?
It is caused by the core structure.
I care about the sounds of the product makes
when being used.
This phenomenon possibly exits during
massage because of the core structure.
Does it matter if the massage wheels have
different massage intensities?
Set the air bag intensity to be “1” through the
Air Bag button. You can also lower the Lower
leg/Foot massage section to reduce the
acupressure force on the feet.
The acupressure force is too large.
Supposing you massage for 30 minutes in two
times (15 minutes for each time) on each day,
about 2.5 kilowatt-hours will be consumed
each month.
How about monthly power consumption of
the product?
Are there any things needing special attention
during moving
？
If the fault still exists after that, contact the shop from which you bought the product.
For safety, the massage wheels will possibly stop upon a too
large external force during use.
For safety, the product will stop upon an obstruction or a too
large force.
If all marks and buttons on the remote controller begin to flicker, it suggests
an extreme abnormality. In this case, turn off the power switch and turn it on
about 10 seconds later.
If the massage wheels stop again, adjust your sitting posture and do not lean
on the backrest completely. (Users, particularly those heavier than 100
kilograms, should follow relevant precautions.)
If all contents and buttons are flickering and the backrest or the footrest has
stopped, turn off the power supply and turn it on about 10 seconds later and
then operate the product.
If the head is not in contact with the headrest, or the back is not in contact
with the backrest, the shoulder position in body type detection will possibly
be lower than the actual position. Sit in the deepest position of the product,
lean your head on the headrest and operate from the beginning again.
It is not a fault but a normal phenomenon because the product is provide
with a massage core allowing alternate beats of the massage wheels.
To avoid accidents, contact an authorized service center.
The power line is disconnected.
Due to the heater structure, the product will still feel warm shortly after
heating because of the residual heat.
If a single part is continually massaged even after the heating function is
disabled, you will feel increasingly warmer.
The power switch is not turned on.
No program is selected after ON button on the remote controller is pressed.
The massage wheels stop
during use
(The product beeps and all icons and
buttons on the remote controller
flicker and then go out.)
The product cannot tilt, or the
footrest can not be raised or
lowered
(The product beeps, the running light
on the remote controller go out and
the product stops)
The massage wheels cannot
reach the shoulders or the
neck
The left and right massage
wheels have different heights
(intensities)
The product cannot run at all.
The product cannot cool down
even if the Dual-temperature
function is disabled
The product is damaged
The power line or the power
plug had abnormal heating
Upper body (the neck to the waist)
massage
Lower leg/Foot massage
After a fault happens, inspect and try the corresponding method below.
If above solution are not applicable, kindly refer to “Product Warranty Card” and contact
OGAWA service center.
Fault Cause and elimination method
Troubleshooting