Ogawa AiryMate, Руководство пользователя

Страница: 16 / 21

OGAWA
Install the filter
Information
This air purifier inside the attached all the screen pack, but use the product before,
wubi first filter to remove the packing. Please follow these instructions to unload all
filters and remove the packing, and then put back into the purifier.
Be careful
Ensure that the power supply is installed, maintained and transported in
the absence of power supply.
Do not operate the machine without installing the filter screen.
Please remove the plastic packaging of each filter before use.
Prompt
When the filter is removed or inserted, the air purifier can be pressed on the
wall to enhance the stability.
Prompt
Operation steps
For the first time using the air purifier, follow these steps to properly install the filter.
1 Place your fingers in the recesses of the
side panels and gently pull the top part of
the front panel towards you. Then lift the
hooks at the bottom of the panel out of the
bottom of the appliance. 2 Remove all the filters from the appliance.
3 Remove all packaging material
from the filters.
4 Put the three filters back into the
appliance. Note: Makes sure that
the side with tag is outwards.
5 Place filter 1 (pre- filter) in the appliance.
Note: Make sure that the side with the two
projections is pointing towards you.
Note: Make sure that all hooks are properly
attached to the appliance.
6 To reattach the front panel, insert the
bottom hooks into the bottom of the
appliance first. Then push the panel
against the body of the appliance.