Here is what is should look like with wire and air hose
connected.
Here is what it will look like after you detach the side
board cover.
Here are the two side boards.
Connect wires in footrest.
Connect both footrest wire connectors and screw the caps tight. Then connect the
air hose.
Caution:
After the wire connector has been connected the cap must be screwed tight.
6
Fully connect footrest to base.
Move the footrest closer to the chair. Engage the joints of the footrest and the base.
Lift footrest up to align the holes on the joints, then insert the bolt and lock it with cotter pin (that you had set aside).
7
Open box 2 with side boards.
Take out the side boards. Detach the cover from the side board.
8
Attach the right side board.
Remove the cable tie to release the air hose first. Then fix the five
double-threaded screws onto the frame.
9
Here is what the connector looks like.
Here is the cable tie you are to cut off.
Here is what it will look like once you have fastened in the
double-threaded screws.
Here is how you detach the side board cover.
Содержание Ai Masterdrive
Страница 1: ...OG 8800 ...