Ogawa ACTIVO TREK PRO T8-1, Руководство по обслуживанию

Страница: 30 / 41

Conversion console display in Metric(km) or English(ml)
Switch the power on, press and hold START button and hold them, then pull up the
safety key, console will display “KM” or “ML”, use START button to select between
“KM” and “ML”, then press STOP/ENTER to confirm and return power on status.
Enter the service Engineer Mode
Switch the power on, press and hold INCLINE UP and DONW and STOP/ENTER 3
buttons and hold them, then pull up the safety key to enter the ENGINEER MODE.
Time/Distance display shows “
1 ” and blinking.
Set and display the manufacture date and software version
Press START button, Time/Distance display shows the manufacture YEAR, Heart
Rate display shows manufacture MONTH, Calories display shows manufacture DATE.
Speed display shows software version. The service engineer can adjust the
manufacture date by pressing Incline Up and Down button follow the blinking display
then press
STOP/ENTER button after each adjustment to record the service date if
necessary. After all the adjustment done, press STOP/ENTER button again to exit the
Engineer Mode.
Incline Calibration
Enter Engineer mode.
Press
INCLINE UP and DOWN button to select computer display shows “ 2 ” then
press START button to enter the Incline Calibration Procedure.
Incline Level display shows “0”. Press INCLINE UP and DOWN button to bring the
deck to horizontal position then press STOP/ENTER button to set the L0 level.
After set the L0 level, Incline Level display shows “12” and the treadmill will
automatically incline up. Waiting for treadmill incline stop, press
INCLINE UP and
DOWN button to adjust incline L12 correct position , then press STOP/ENTER twice
to set the L12 level and exit the engineer mode.
Engineer mode Setting
200mm
380mm
Incline level 1 position
Incline level 12 position