OFYR MISE EN PLACE 135 PRO, Руководство пользователя

Страница: 4 / 12

4 OFYR
®
MANUAL - OFYR
®
MISE EN PLACE TABLE PRO
2. SAFETY AND SETUP INSTRUCTIONS
Due to the considerable weight of the elements unpacking and placing of the product
should be done by at least 2 people.
While the corrosion is still superficial, the Corten steel elements may cause orange
stains on clothes, skin, and the surface they stand on. When it rains, corrosive water may
also run off these elements, which may permanently stain light-toned stone or wooden
surfaces.
When mounting the parts of your OFYR
®
Mise en Place Table PRO do not use the handle
to tilt the base. The handle is only suited to pull or push the device once the wheels are
mounted.
The OFYR
®
Mise en Place Table Black 65 PRO and 135 PRO are more sensitive to damage
during setup because of its coating.
Only
place OFYR
®
Mise en Place Table PRO on a hard, leveled, and stable surface.
The wheels of your OFYR
®
Mise en Place Table PRO are not equipped with breaks. If the
surface is not completely level, wedges should be put under the wheels in order to be
certain that the table cannot move.
We strongly advise against leaving the wooden board on the table outdoors.
This because wood is a natural product and is always liable to warp somewhat.
3. DISCLAIMERS
3.1 SAFETY AND SETUP-, INTENDED USE- AND MAINTENANCE INSTRUCTIONS/TIPS
We are not liable for any injuries or damages as a consequence of not following our safety and setup-,
intended use- and maintenance instructions/tips.
3.2 CORTEN STEEL
OFYR
®
Mise en Place Table Corten PRO is made of Corten steel: a metal with a natural layer of
corrosion that protects against rust perforation and is designed to withstand all weather conditions.
OFYR
®
Mise en Place Table Corten PRO come with the additional service that the corrosion process
has already started by the time they are delivered. Upon delivery, it takes another 6-12 months for
the initial corrosion to turn into a fully protective layer.
The unit’s color may change over time as the corrosion process may not yet have fully
unfolded. We are not liable for the way the color wil change.
Any Corten steel components that are less corroded than others upon delivery are
not eligible for replacement. All components will corrode naturally over time under
influence of the weather. We are not liable for differences of corrosion between different
components.