Ofs Gathr, Руководство по сборке

Страница: 6 / 16

6 ofs.com imagine a place® 800.521.5381 Assembly instructions
Gathr assembly instructions
Tools/hardware required:
Impact screwdriver
#2 Quad drive bit
2-12" Squeeze clamps
Level (minimum 3' recommended)
Hardware: HK-15
Gathr island assembly
Note : Bolt seats together using instructions in Attaching Ganging Seats on page 3.
1. First assemble each half round and straight section as shown below. (Figure A)
Note: Some island set ups may not use straight modules, and will only consist of the outside
wedge modules.
2. If using straight modules, attach the straights to one of the end wedge assemblies. (Figure B)
3. Slide the last end assembly over and attach. Add the planter support spacers to the notched out
ends on the back of units. Attach with hardware kit HK-15. (Figure C)
Figure A
plan and elevation view
Figure B
Planter support
spacers
Figure C
detail
C
Figure C