Ofs Edward Jones BOA, Руководство по сборке

Страница: 11 / 14

11 ofs.com imagine a place® 800.521.5381 Assembly instructions
E5 BOA assembly
Materials
Desk assembly - part 1
(E5-1627BBF)
1. Remove red shipping key.
2. Install core/key (located inside the pedestal).
3. Locate HK-15 (#8 x 1.5" quad pan head screws), used to attach pedestal to back panel
and worksurface.
4. Re-install drawer front pulls facing outward.
5. Level the pedestal.
6. Remove drawers from pedestal to gain access to the case spacer in the back of the
pedestal.
7. Attach pedestal to back panel using HK-15 screws. Make sure back panel and pedestal
is flush on the side and top. Do not put the drawers back in the pedestal. They need to
be out to install the worksurface.
8. Attach HK-10 (L-bracket with screws) to the back panel. Pre-drilled holes are on the
back panel to locate the L-brackets. You will only use 4 sets of the holes - not all 5.
9. Save the left over screws of the HK-10 to attach the L-brackets to the worksurface.
Pre-drilled hole
HK-10, Qty: 4 of L-bracket
Needs to be
flush with
each other
Case spacer
HK-15 screws will go through
these pre-drilled holes to
attach the pedestal to the
back panel and worksurface.
Back view of
E5-1627BBF
Detail L
INSTRUCTIONS
DETAIL A
SCALE 1 : 2
SHIPPING KEY
HK-15, QTY 8 OF #8 X 1.5"
QUAD PAN HEAD SCREWS
UNPACK & POSITION LATERAL FILE PEDESTAL
(E5-3022MFC) NEAR FINAL LOCATION
REMOVE RED SHIPPING KEY. •
INSTALL CORE/KEY (LOCATED INSIDE •
THE PEDESTAL).
LOCATE HK-15 (USED LATER TO ATTACH •
WORKSURFACE).
RE-INSTALL DRAWER FRONT PULLS •
FACING OUTWARD.
LEVEL THE PEDESTAL. •
Rev: Dwg:
HK-10
L-bracket
Quantity: 4
HK-15
#8 x 1.5" Quad pan head screws
Quantity: 8