40090
7mm
R-Ring
40090
7mm
R-Ring
40090
2mm
Washer
40090
2mm
Washer
40090
1mm
Washer
40090
1mm
Washer
40090
3.5mm
O-Ring
40090
3.5mm
O-Ring
40090
3.5mm
O-Ring
40090
3.5mm
O-Ring
40076(Front)
Shock body
40077(Rear)
Shock body
40059
14.7mm
O-Ring
49041
Spring Adjuster
40060
2.5mm
Nylon Nut
40060
2.5mm
Nylon Nut
2.6x5mm
Washer
2.6x5mm
Washer
32235
Shock Piston
32235
Shock
Piston
40093
Shock Cap
32033
Pressure Top
UP
Down
Move slowly.
30411
6mm
Ball
40058
Shock Shaft
Dust Cover
* Push 6mm ball
joint into ball
end.
40069
Shock Spring
(Black)
40063
Spring Holder
ASSEMBLY OF THE SHOCK
Fit the o-ring into
groove.
( Make 2 for rear. )
( Make 2 for front.)
* Be careful not to damage
shock shaft.
40059
Oil Seal
40059
Oil Seal
J-47
Shock Plastic
Rod End
40056
Shock Plastic
Rod End
1. Pull down piston and pour
oil into shock cylinder.
FILL THE SHOCKS WITH OIL
2.To remove air bubbles by slowly
moving piston up and down.
3. Pull down piston, attach pressure top
and shock oil overflow with tissue
paper.
*Fit into the groove.
ASSEMBLY THE DUST COVER AND SHOCK SPRING
40055
Short Shaft
* Long shaft
for rear.
* Short shaft
for front.
40054
Short Shaft
*40058
Cut 6mm for front.
49041
