Use 2mm hex wrench to
adjust 4x10mm set screw
in front lower arm.
Use 2mm hex wrench to
adjust 4x10mm set screw
in rear lower arm.
(FRONT)
(REAR)
(REAR)
ADJUSTMENT OF THE CHASSIS
CLEARANCE
Place the model car on flat surface.
Use 2mm hex wrench to adjustment
the chassis to it's minimum clearance.
We Suggest: 10mm in front and rear.
Adjustment of the right and left-side
are the same height.
ADJUSTMENT OF THE FRONT AND REAR CAMBER
(FRONT)
SET-UP OF THE FRONT WIDTH
(FRONT)
0
0
0
+
+
-
-
* Use a 2.5mm hex wrench to
adjust length of the front
lower steering ball will make
the front become width or
narrow .
Adjust from the
lower steering ball.
Adjust from the upper
steering ball of the
front knuckle arm.
The rear camber adjustment can
made by moving the turnbuckle rod
on the upper arms, clockwise or
anticlockwise.
154mm
Center
(Positive)
(Positive)
(Negative)
(Negative)
FRONT TOE-IN AND TOE-OUT SETTING
Steering Rod
Toe-In
Toe Out
Adjust the length of the front
steering rod to change the toe
angle.
Making the steering longer will
make the front tires become
toe-in. Response will be slower.
Making the steering rod shorter
will make the front tire became
tor-out. Response will be quicker.
SETTING UP
