21
59
STARTING OF THE ENGINE
1. Turn on transmitter and then receiver.
2. Fill fuel tank with fuel bottle.
3. Connect 1.2V glow plug
.
4. Start engine with a 12V starter.
( Note the direction of the starter.)
5. After the engine has started, remove the
1.2V glow plug
.
igniter
igniter
* Follow the engine manufacturer instruction
manuals regarding engine set-up, carburetor
and maintenance.
How to start the engine:
Starter rubber ring for car.
( Insert starter rubber ring
on the 12V starter.)
12V Starter
A 12V Starter and Starter
Ring ( Not Included)
1.2V
Glow Plug Igniter
Charge for 1.2V
Glow Plug Igniter
1.2V Glow Plug Igniter and
Charger (Not Included)
Glow Plug (Not Included)
*There are 2 types of glow plugs
available "NORMAL or Turbo"
depending of the type of the engine.
Normal Plug
Turbo Plug
*To start the car, attach a glow plug igniter
to the glow plug, and use either a 12V electric
starter, starter box or pullstart to start engine.
Starter Box
(Not Included)
1.2V
*Connect to a
12V battery.
*Notice the clockwise direction
of the starter ring.
1.2V
*Applied to the flywheel
exposed through the
chassis.
SHIFT UP TIMING ADJUSTMENT
Adjust the engine before adjusting the clutch shift timing.
Adjust the engine as per engine instruction manual.
1. Once the engine adjustments have been completed, proceed to the
adjustment of the clutch shoe shift timing.
(Using a 2mm allen wrench to adjust the clutch shoe on either side.)
Note: Clockwise--------Shift timing will become slower.
Counterclockwise---Shift timing will become quicker.
2. Adjust the clutch shift timing for your track conditions.
As you tighten (Clockwise) the 3x15mm screw, the shift timing will
become slower.
As you loosen (Counter-clockwise ) the 3x15mm screw, the shift timing
will become quicker.
3. Set the shift timing to the track conditions while the car is running.
3x15mm
Hex Screw
3x15mm
Hex Screw
6x6mm
Set Screw
2mm
Allen Wrench
Clockwise
(Tighten)
Anti-clockwise
(Loosen)
ADJUSTING THE SHIFT POINT
2 SPEED GEAR RATION COMBINATIONS
2 speed transmission allows the car to have more punch out of the
corners and higher top speed. We offer many different pinion and
spur gear combinations which can be used for different tracks.
Spur Gear
Clutch Gear (4 tooth different)
49T/45T
48T/44T
15T-19T
16T-20T
17T-21T
Torque
Speed
