Officine Gullo GGS8P, Инструкция по эксплуатации

Страница: 25 / 32

25
Officine Gullo
USER MANUAL
INSTRUCTIONS FOR USE
Attention! The appliance must only be used under surveillance.
LIGHTING AND ADJUSTING THE BURNERS
On the front panel, above each knob, there is a symbol which indicates to which burner
the knob corresponds.
To light, turn the knob to the left from position “0” to the
symbol (see figure); keep
it pushed down and press the button with the symbol until the gas lights.
The knob must be kept pushed down for a few seconds and then released. The flame
may go out, in which case it is necessary to repeat the procedure. By turning to the
position, the burner is brought to the minimum. To put out the burner, turn the knob back
into the “0” position.
LIGHTING AND ADJUSTING THE COUP DE FEU
On the front panel, above each knob, the burner it corresponds to is indicated by the
index.
To light the pilot flame, turn the knob to the left from position “0” to the symbol
(see figure); keep it pushed down and press the button with the symbol until the gas
lights. Keep the knob pressed a few second and then let it go.
If the flame goes out you have to repeat the procedure.
By turning the knob round to the position the burner is at maximum.
By turning the knob round to the position the burner is at minimum. To switch off,
move the knob back into position " 0".