8
Officine Gullo
Electrical Supply.
This appliance requires electrical supply ensure an appropriately qualified person
completes the electrical oven-up. The appliance must be connected to an equipotential
system.
The connection screw is positioned at the back of the appliance and is identified by
the symbol
.
T
he appliance is supplied without the connection cable. To install the power supply
cable, proceed as follows:
- Disconnect the power supply.
- Remove the bottom panel
- Push the connection cable through the cable blocker, connect the conductor wires
to the corresponding terminals in the junction box and fix them into place.
- Block the cable with the cable blocker, and reassemble the bottom panel. The earth
wire must be longer than the others so that if the cable blocker should break, it will
disconnect after the tension wires.
The connection cable must have an adequate section for the power of the appliance
and be resistant to a temperature of at least 150°C (see technical data table).
DIMENSIONS
cm
POWER SUPPLY
Power
max kW
Absorbition
max A
Power
supply cable
CVCS4EM
40 x 70 x 90h
230V~ 50/60 Hz
7,8
33,91 A
3 x 6 mm²
TECHNICAL ELECTRICAL DATA TABLE
