Officine Gullo BBS4G, Инструкция по эксплуатации

Страница: 13 / 16

13
Officine Gullo
CLEANING AND MAINTENANCE
Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with high
pressure.
Daily cleaning after switching off the appliance ensures the perfect functioning and long life of the appliance. The
parts in steel must be cleaned with a detergent-soaked cloth without rubbing; after that, rinse with clean water and
dry with a dry cloth.
Do not use abrasive or corrosive detergents.
Important: As well as ordinary cleaning and maintenance, it is advisable to have the installation checked by an
installer at least once a year.
It is therefore suggested to draw up an after-sales assistance contract.
Cleaning burnished brass surfaces
No synthetic protective varnishes have been used to obtain the special burnishing effect on the burnished brass
details in order to avoid spoiling the beauty of the brass with an artificial patina. The antique finish of the surface
is the result of natural oxidation that has simply been accelerated. All the natural antique finish brass surfaces can
be cleaned with any kitchen degreasing detergent, accompanied by the use of an abrasive scouring pad (the
green colored type used for washing dishes). It is recommended that the metal be rubbed, uniformly applying light
pressure, until the desired effect is achieved.
The brass details should then be dried.
Do not use polish as this is suitable for maintaining the gloss but not the antique finish and could result in an effect
that is not compliant with our products. Any spots that may appear over time on the burnished brass surfaces should
be considered as a desirable and particular characteristic of our craft metal working processes.
Cleaning chromium-plated brass surfaces
No synthetic varnishes have been used to obtain the special polish on the chromium-plated brass details in order to
avoid spoiling the beauty of the chromium plating with an artificial patina. All the chromium-plated surfaces should
be cleaned, where necessary, with a soft, possibly micro-fiber cloth, combined with metal polishing products, if
required. Do not use abrasive pads.
Cleaning satin finish nickel-plated brass surfaces
No synthetic varnishes have been used to obtain the special nickel-plating on the satin finish nickel-plated brass
details in order to avoid spoiling the beauty of the nickel-plated, satin finished solid brass with an artificial patina. All
the nickel-plated and satin finished brass surfaces should be cleaned, where necessary, with a soft, possibly micro-
fiber cloth, combined with a neutral detergent, if required. Do not use abrasive pads.
Cleaning the varnished surfaces
All the varnished surfaces should be cleaned using a neutral detergent and, where necessary, a soft, possibly micro-
fiber cloth. Do not use abrasive pads or any other chemical products.
Cleaning brushed steel surfaces
All the brushed steel surfaces should be cleaned using degreasing products or products specifically designed to be
used on steel and, where necessary, extra-fine steel wool or extra-thin sandpaper.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
Turn off the gas tap and notify the after sales service.