®
®
www.officesourcefurniture.com
PBTR60
ASSEMBLY INSTRUCTIONS
STEP 3. SLIDE PANELS INTO PLACE
STEP 4. ATTACHING TRANSACTION TOPS
3.1
Insert a 3/4” screw into threaded hole in each
corner of the panel. Once all the way in,
back out each screw 2 turns.
3.2
Slide panels into place, making sure that
exposed screw head slides down appropiate
channel on post.
3.3
If using glazed panel, in addition to the four
screws, (not required on fabric panels) secure
panel by inserting Neoprene strips between
panel and post (Neoprene strips are provided
with the panel).
3.4
Ensure cover strips on the post are propery
placed.
Note. If using transaction tops,
proceed to Step 4
3.5
Tighten locking nut. Place caps on top of divider post.
3/4” Screw
3.1
3.2
Note: All transaction tops come with necessary connecting hardware
4.1
Remove nut and washer. Slide connecting bracket onto threaded rod and divider post.
4.2
Fasten connecting bracket to divider post by tightening locking nut.
4.3
Align connecting brackets
with recessed cut outs on
underside of transaction tops.
4.4
Attach flat brackets to under
side of adjoining transaction
tops with 4 wood screws
provided.
4.1
4.2
4.3
4.4
Underside of
transaction top
STEP 2. MOUNT DIVIDER POST
2.1
Place divider post over mounting plate.
2.2
Screw threaded rod through divider
post and into mounting plate.
2.3
Place washer then nut on rod and
finger tighten only.
2.3
2.1
2.2
