© Office Star Products December 2005
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
Insert Pneumatic Cylinder (3) into Base (1).
STEP 2 Attach Seat Plate (4) to Seat Cushion (5), with the arrow towards the front of the chair, using four
Screws (7) and four Flat Washers (6).
FULLY TIGHTEN SCREWS.
STEP 4 Place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . 1
4. Seat Plate . . . . . . . . . . . . . . . . 1
5. Seat Cushion . . . . . . . . . . . . . . 1
6. Flat Washer . . . . . . . . . . . . . . . 4
7. Screw . . . . . . . . . . . . . . . . . . . . 4
8. Allen Wrench (Not Shown) . . . 1
ST418V CHROME & VINYL STOOL
ASSEMBLY INSTRUCTIONS
5
2
1
3
6,7
6,7
6,7
6,7
4
