PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . 1
4.
Mechanism . . . . . . . . . . . . . . . 1
5.
Seat . . . . . . . . . . . . . . . . . . . . . 1
6.
Back Assembly . . . . . . . . . . . . 1
7.
Arms (7L & 7R) . . . . . . . . . . . . 2
8.
Arm Screws . . . . . . . . . . . . . . . 8
9.
Mechanism Screws . . . . . . . . . 4
10.
Back Support Screws . . . . . . 3
11.
Back Support (Pre-Installed) . 1
12.
Allen Wrench . . . . . . . . . . . . . 1
1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Align the holes in the Arms (7L & 7R) with the holes in the Seat (5), attach Arms (7L & 7R) to Seat (5) using four Arm Screws (8) for each
Arm (7).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3
Attach Mechanism (4) to Seat (5) with the arrow towards the front of the chair using four Mechanism Screws (9),
FULLY
TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 4
Attach Back Support (11) to rear of Mechanism (4) using three Back Support Screws (10),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 5
Insert Pneumatic Cylinder (3) into Base (1), Place the assembled seat on top of Pneumatic Cylinder (3) and
apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
© Office Star Products May 2012
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
2
3
1
12
10
11
7R
8
8
12
12
9
4
4
5
7L
X5
X4
X4
6
839-11B35WA
BREATHABLE MESH & SEAT BACK CHAIR
ASSEMBLY INSTRUCTIONS
X4
X3
5