PART
QTY
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Casters . . . . . . . . . . . . . . . . . . 5
3. Pneumatic Cylinder . . . . . . . . . 1
4. Seat Plate . . . . . . . . . . . . . . . . 1
5. Seat Cushion . . . . . . . . . . . . . . 1
6. Back Assembly . . . . . . . . . . . . 1
7. Arms (7L & 7R) . . . . . . . . . . . . 2
8. Arm Screws . . . . . . . . . . . . . . . 6
9. Allen Screws . . . . . . . . . . . . . . 3
10. Seat Plate Screws . . . . . . . . 4
11. Back Support (pre-installed) . 1
12. Allen Wrench . . . . . . . . . . . . . 1
10
12
8
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place.
STEP 2
Align holes of Arms (7L & 7R) with holes of Seat Cushion (5), secure Arms (7L & 7R) using three Arm Screws (8) for each Arm,
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 3
Attach Seat Plate (4) to Seat Cushion (5) with the arrow towards the front of the chair, using four Seat Plate Screws (10),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (12).
STEP 4
Attach Back Support (11) to Seat Plate (4) using three Allen Screws (9),
FULLY TIGHTEN ALL SCREWS
USING ALLEN WRENCH (12).
STEP 5
Insert Pneumatic Cylinder (3) into Base (1), place the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
© Office Star Products June 2008
5
6
3
1
1
7L
7R
11
9
12
x3
x3
x4
2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
x3
5
8
x5
12
4
4
88 SERIES
SPACE FLEX™ MANAGER’S CHAIR
ASSEMBLY INSTRUCTIONS
