90662
MESH BACK MANAGER’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products January 2012
PART QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Bellows . . . . . . . . . . . . . . . . . . . . . 1
5.
Mechanism . . . . . . . . . . . . . . . . . . 1
6.
Seat Cushion . . . . . . . . . . . . . . . . . 1
7.
Back Assembly . . . . . . . . . . . . . . . 1
8.
Arms (8L & 8R) . . . . . . . . . . . . . . . 2
9.
Flat Washers . . . . . . . . . . . . . . . . . 5
10.
Star Washers . . . . . . . . . . . . . . . . 2
11.
Mechanism Screws . . . . . . . . . . . 6
12.
Backrest Screws . . . . . . . . . . . . . 4
13.
Knob . . . . . . . . . . . . . . . . . . . . . . 2
14.
Bracket Screws . . . . . . . . . . . . . . 3
15.
Back Support (pre-installed) . . . . 1
16.
Allen Wrench (not shown) . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1) and slip
Belows (4) over Pneumatic Cylinder (3).
STEP 2
Align holes of Arms (8L & 8R) with holes of Seat Cushion (6), secure Arms (8L & 8R) using one Knob (13), one Flat Washer (9) and one Star Washer (10) for
each Arm (8),
FULLY TIGHTEN ALL KNOBS (13).
STEP 3
Attach Mechanism (5) to Seat Cushion (6) with the arrow towards the front of the chair using six Mechanism Screws (11),
FULLY TIGHTEN ALL SCREWS.
STEP 4
Attach Back Support (15) to Back Assembly (7) using four Backrest Screws (12), secure Back Support (15) to rear of Mechanism (5) using three
Bracket Screws (14) and three Flat Washers (9),
FULLY TIGHTEN ALL SCREWS.
STEP 5
P
lace the assembled seat on top of Pneumatic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
1
2
3
4
5
6
7
8L
8R
9
10
9
14,9
10
11
15
12
13
13