85670
VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products September 2010
STEP 1
STEP 3
STEP 2
2
3R
3L
5
4
7
6
1
PART QTY
1. Seat Cushion . . . . . . . . . . . . . . . . . 1
2. Backrest . . . . . . . . . . . . . . . . . . . . . 1
3. Arm Frame (3L & 3R) . . . . . . . . . . 2
4. Cross Bar . . . . . . . . . . . . . . . . . . . . 2
5. Screw w/ Washer . . . . . . . . . . . . . . 4
6. Backrest Screw . . . . . . . . . . . . . . . 4
7. Plastic Cover . . . . . . . . . . . . . . . . . 1
8. Allen Wrench (not shown) . . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Attach Cross Bars (4) between Arm Frames (3L & 3R) and secure to bottom of Seat Cushion (1) using four Screws w/ Washers (5),
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (8).
STEP 2
Secure Backrest (2) to Arm Frames (3L & 3R) using four Backrest Screws (6).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH (8).
STEP 3
Attach Plastic Cover (7) to bottom of chair assembly by applying pressure and snapping it into place.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
3R
3L