8000 / 8001
EXECUTIVE LEATHER CHAIR
ASSEMBLY INSTRUCTIONS
© Office Star Products January 2012
PART
QTY
1.
Base . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Casters . . . . . . . . . . . . . . . . . . . . . 5
3.
Pneumatic Cylinder . . . . . . . . . . . . 1
4.
Mechanism . . . . . . . . . . . . . . . . . . 1
5.
Seat Cushion . . . . . . . . . . . . . . . . . 1
6.
Back Assembly . . . . . . . . . . . . . . . 1
7.
Backrest Screw . . . . . . . . . . . . . . . 4
8.
Arm (8L & 8R) . . . . . . . . . . . . . . . . 2
9.
Arm Screw . . . . . . . . . . . . . . . . . . . 4
10.
Mechanism Screw . . . . . . . . . . . . 4
11.
Flat Washer . . . . . . . . . . . . . . . . . 4
12.
Back Support (Pre Installed) . . . . 1
13.
Allen Wrench (not shown) . . . . . . 1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1
Insert five Casters (2) into Base (1), push hard until you feel or hear the Caster (2) snap into place. Insert Pneumatic Cylinder (3) into Base (1).
STEP 2
Attach Back Support (12) to rear of Seat Cushion (5) using four Flat Washers (11) and four Backrest Screws (7). Align holes in Arms (8L & 8R) with
holes of Seat Cushion (5) and Back Assembly (6). Secure Arms (8L & 8R) using two Arm Screws (9) for each Arm (8).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13).
STEP 3
Attach Mechanism (4) to Seat Cushion (5) with arrow towards front of chair using four Mechanism Screws (10).
FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (13). Place assembled seat on Pnuematic Cylinder (3) and apply downward pressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
6
9
3
2
1
12
5
8R
11
7
10
4
8L