PART QTY
1.
Monitor Mount . . . . . . . . . . . . . . . . . . . . . .1
2.
Cable Cover . . . . . . . . . . . . . . . . . . . . . . . .1
3.
Anti-Slip Rubber 1 . . . . . . . . . . . . . . . . . . .1
4.
Support Bracket . . . . . . . . . . . . . . . . . . . . 1
5.
Anti-Slip Rubber 2 . . . . . . . . . . . . . . . . . . .
4
6.
Threaded Clamp . . . . . . . . . . . . . . . . . . . .1
7.
Bottom Support . . . . . . . . . . . . . . . . . . . . .1
8.
Threaded Stud . . . . . . . . . . . . . . . . . . . . . .1
9.
Anti-Slip Rubber 3 . . . . . . . . . . . . . . . . . . .1
10.
Pressure Plate . . . . . . . . . . . . . . . . . . . . .1
11
. Wing Nut . . . . . . . . . . . . . . . . . . . . . . . . .1
HARDWARE QTY
A.
Phillips Bolt (M4 x 12) . . . . . . . . . . . . . . . .
8
B.
Phillips Bolt (M5 x 12) . . . . . . . . . . . . . . . .
8
C.
Allen Bolt (M6 x 12) . . . . . . . . . . . . . . . . . .3
D.
Allen Bolt (M6 x 14) . . . . . . . . . . . . . . . . . 2
E.
Washer . . . . . . . . . . . . . . . . . . . . . . . . . .16
F.
Allen Wrench (4 x 4) . . . . . . . . . . . . . . . . . .1
G.
Allen Wrench (5 x 5) . . . . . . . . . . . . . . . . .1
Remove all the parts from carton, separate them into part numbers indicated on the list
and make sure part quantities are correct.
STEP 1
Ensure that there are VESA holes 100 x 100mm or 75 x 75mm in the
monitor(s) that is being mounted. If not, the monitor cannot be mounted. Carefully
remove the original fixed base on the monitor(s).
STEP 2-A
OPTION 1: CLAMP
STEP 2B
OPTION 2: GROMMET
STEP 3
ATTACHING MONITOR TO PLATE
Phillips screwdriver also needed for assembly
(not provided)
TIGHTEN
DESK
Please select the appropriate
mounting holes according to
the desks thickness
NOTE
TIGHTEN
DESK
DESK
Keep the counterbore side down
Size of hole: 8.5-70mm
For desk thickness: 25~100mm
Increase washer (E) count
if necessary
A2MAD1730
DOUBLE MONITOR ARM WITH DUAL USB 3.0 PORTS
ASSEMBLY INSTRUCTIONS
A2MAD1730
DOUBLE MONITOR ARM WITH DUAL USB 3.0 PORTS
ASSEMBLY INSTRUCTIONS
