Offgridtec PWM Pro 12/24 10A, Руководство пользователя

Страница: 10 / 13


Fault Indication
Status Icon Description
battery discharged battery icon is empty, frame blinks,
fault icon blinks
battery overvoltage battery icon is full, frame blinks,
fault icon blinks
battery overheated battery icon shows current charging
level, battery frame blinks, fault icon
blinks
load failure load overload*, load short circuit
* When load current reaches1.02-1.05 times 1.05-1.25 times, 1.25-1.35
times and 1.35-1.5 times more than nominal value, controller will
automatically turn off loads in 50s, 30s, 10s and 2s respectively.
4.3 Load Mode Setting
To change load mode settings change to the load mode interface. Hold the
SET button for 5s, then press MENU to change parameters and SET again to
confirm the changes.
1** Timer 1 2** Timer 2
100 load output ON/OFF 2 n deaktiviert
101 load output on for 1h after
sunset
201 Lastausgang für 1 Std. vor
Sonnenaufgang an
102-
115
load output on for 2-15hrs
after sunset
202-
2015
Lastausgang für 2-15 Std.
vor Sonnenaufgang an
116 test mode 2n deaktiviert
117 manual mode (default load
ON)
2n deaktiviert
4.4 Battery Type
Under Battery Voltage interface press the SET button for 5s then enter into
the interface of Battery type setting. After choosing the battery type by
pressing MENU button confirm the setting by pressing the SET button
again.

Battery Type
1. sealed (default) 2. gel 3. flooded
NOTE: Please refer to the battery voltage parameters table for the
different battery type.