Offel 55-106 M101, Руководство пользователя

Страница: 33 / 40

User manual
Art. 55-106 M101
Rev. 0 03.2019
pag. 33
Offel s.r.l. Via Lato di Mezzo, 32 48022 Lugo RA - Italy Tel. +39 0545/22542 offel@offel.it www.offel.it
It is possible to complete the measurement after capturing the cleanest and highest signal level in the entire spectrum
band.
LEVEL KEY: In this screen, once the LEVEL button is pressed, the C / N value will be displayed (fig. 190).
Fig. 189 Fig. 190
MENU KEY: when the MENU button is pressed, on the SPECTRUM screen it is possible to easily perform
measurements with the functions on the screen
(fig. 191).
Fig. 191 Fig. 192 Fig. 193
AUTO RANGE: automatically determines the measurement range based on the highest and lowest signal level on the
SPECTRUM screen.
FULL / EMPTY: you can see the levels in the SPECTRUM screen as full or empty (fig. 192).
MASK SAVE: it is possible to save the measurement with the MASK SAVE function when measuring the spectrum,
then use the MASK LOAD function to recall it and use it as a reference (fig. 193).
SAVE TO USB: it is possible to save the measured values as a table * .CSV on USB.
EDIT BUTTON: in the SPECTRUM screen it is possible to manually change the display parameters by pressing the
EDIT button (fig. 194).
IF FREQ: it is possible to see the frequency on which the marker is positioned.
SPAN: you can select the desired frequency range on the screen.
REF .: it is possible to select the highest measuring point.
RANGE: it is possible to select the level range of the signal to be measured.
Fig. 194