Step 4:
Place a clip on each end of a pole and snap onto the frame
(avoiding the silver connecting piece on
72”
walls) in approxi-
mately the middle of a side. Rotate the wall 90 degrees and
add another cross piece.
The clips may be hard to attach the
first time, you may need to step on it gently until it
“
snaps
”
into
place.
Step 5:
Place a clip on one end of a pole and an end cap on the oppo-
site end. Clip the pole to one side of the frame, towards an out-
side edge. Repeat with the remaining pole at the opposite
edge. These two poles are referred to as
“
legs
”.
Step 6:
Clip a stabilizer bar to a
“
leg
”
and to the bottom of the frame.
Repeat with the remaining stabilizer bar.
Need help? Call 206
-
618
-
2167
or email [email protected]
Bottom of wall
frame
Stabilizer Bar
Top of wall frame
Leg
Stabilizer Bar
Stabilizer Bar
Leg
Leg
Prefer video instructions?
Visit us at
www.OffTheWallQuilt.com
