
8
3.3 Setting the back-rest angle and positioning
To change the back-rest depth:
•
Loosen the backrest-positioning bolts (on both sides)
•
Loosen the backrest-inclination bolts (on both sides).
•
Loosen the axle-bracket bolts (on both sides)
•
Loosen the backrest-axle bolts (on both sides)
•
Unscrew and remove the inclination-plates’ screws (both sides)
•
Find the desired position aligning the holes on the plate to those on the
seat tube
•
Put the screws back and tighten carefully ALL 14 bolts back in place.
Axle-brackets bolts
Bracket-positioning bolts
Axle-bracket bolts
Backrest-inclination bolt
Inclination-plates’ screw