Clamp pincer CP 10 / CP 20 / CC 20
5
Use of clamp pincer
The following description serves as an example for ear clamps. You can find more detailed information on
OETIKER products from your local OETIKER representative.
Prerequisites:
– Closing force and closing force holding time
have been set using the PC software and
uploaded to the clamp pincer.
– The clamp pincer has been calibrated.
1. Insert the ear of an OETIKER clamp (Fig. 14/1)
into the clamping range of the pincer head
(Fig. 14/2).
Fig. 14:
Inserting a clamp
2. Press the START button (Fig. 15/3) and hold it
Fig. 15:
Start closure
The closing process is triggered and the clamp
(Fig. 16/4) closes.
On reaching predefined parameter values the
pincer jaws are opened.
3. Release the START button.
Fig. 16:
The clamp is closed
INFO
Closure is performed using the closing data parameters uploaded by the PC software.
Additional closures can now be performed.
Issue 11.15
08902961
5-27
