It is a violation of Copyright law to make and distribute copies of instructions or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2013 OESD, LLC. All rights reserved.
Instructions
Christmas Village: Cottage with Fence
6
•
Attach the assembled porch to the front wall by
inserting the buttonettes of the porch floor into
the eyelets along the bottom of the front wall. Next
connect the single eyelet on the short edge of each
pillar into the eyelet on each edge of the front wall.
Photo E
**Note: The pillars were removed for the sake of this picture.
Do not remove pillars when attaching assembled porch.
•
Attach the front roof panel. Starting at the top, insert
the buttonettes on the left wall to the eyelets of the
front roof panel. Work your way across the front wall
and up the right wall. Finish by inserting the buttonettes of the porch
supports to the eyelets found in the front corners of the front roof
panel.
Photo F
•
Attach the chimney. Starting at the bottom right of the chimney,
insert the buttonettes of the chimney to the eyelets of the right wall.
Alternate left and right buttonettes and work upward toward the roof.
Leave the chimney top unbuttoned.
Photo G
•
Attach the back roof panel. Start by inserting the three buttonettes of
the top edge of the front roof panel into the three eyelets of the top
edge of the back roof panel. After this begin at the top buttonette
on the left wall, near the chimney. Work down the left wall, across
the back wall and up the right wall by inserting the buttonettes of the
walls to the corresponding eyelets on the back roof panel.
•
Insert the three buttonettes along the left side of the back wall to the eyelets on the left wall.
•
Insert the single buttonette of the foundation into the eyelet of the back wall.
•
Complete the chimney by inserting the two buttonettes of the left wall of the chimney into the eyelets on the back wall of
the chimney.
Photo H
•
Your Free Standing Lace Cottage is complete!
To assemble the Cottage Arch
•
The arch is actually formed with the “wrong side” outward. This is done this way so the stone foot
path is presented with the “right side” up and so that the trellis archway stands upright correctly.
•
Form the arch when the lace is still slightly damp. Pinch the two “hinge lines” together and apply
a light downward pressure to the top of the arch formed. Be sure the “wrong side” is facing
outward or the arch way will attempt to collapse even if completely dry. Set down and allow the
trellis to dry completely.
Photo I
•
Insert buttonettes on the stone foot patch to the eyelets on the arched trellis.
•
Your Freestanding Lace Garden Trellis Archway is now complete.
To set up Cottage Fence
•
Fence panels should be dried as flat as possible. After dry bend the tabs at a 90 degree angle to create supports. Bend
fence panels at the hinge line to create corner pieces.
•
If desired, sew the fence panels together for increased stability, or leave them as individual panels for more versatility.
Photo E
Photo F
Photo G
Photo H
Photo I
