Oerlikon Torque-Hub CW18 Series, Руководство по обслуживанию

Страница: 6 / 72

6
BRAKE CHART
9
th
DIGIT
IN
MODEL
CODE
(INPUT
BRAKE)
BRAKE
PART
NUMBER
NUMBER
OF
SPRINGS
RELEASE
PRESSURE
MIN (psi)
RELEASE
PRESSURE
MAX (psi)
FULL
RELEASE
PRESSURE
(psi)
MAXIMUM
PRESSURE
(psi)
BRAKE
TORQUE
(in-lbs)
1 AM902446A 11 100 138 145 3000 3754
2 AM902446B 16 144 182 210 3000 5411
3 AM902446C 19 170 214 250 3000 6386
4 AM902446G 13 118 149 171 3000 4422
J AM902446A 11 102 129 145 3000 3110
K AM902446B 16 147 184 210 3000 4481
L AM902446C 19 174 217 250 3000 5288
M AM902446G 13 120 151 171 3000 3662
A 902315A 6 92 123 130 3000 2940
B 902315B 9 138 184 190 3000 4410
C 902315 11 168 225 230 3000 5390
G 902315C 7 107 143 150 3000 3430
SPRING CHECKING PROCEDURE:
Install input brake bolts into holes in the brake piston. Tighten bolts
in such a way to ensure the brake piston remains straight while
being compressed into the brake cavity of the spindle.
Carefully remove the retaining ring from the spindle. Slowly remove
bolts from the input brake. Remove the cover plate from the end of
the input brake and count the number of springs in brake. If number
of springs matches the number in the
BRAKE CHART , go to the
next step. If the number of springs does not match the number in
the
BRAKE CHART above, install the correct number of springs.
Continued on Next Page