Roads MK I Electric Piano Operation Manual
Section 4: Warm
Warm applies noise reduction and is used to damp the high frequencies, resulting in a more ‘warm’
sound.
Warm
(Warm): Determines the amount of the high frequency cut, applied by the filter (Scale: 0
/ 100. Default: 0).
Section 5: Hammer
Hammer adds the sound of the hammer action of the keyboard to the signal chain. As each key
has it own character, all the 73 keys were recorded.
Hammer
(Hammer): Determines whether the hammering is added to the signal chain (Scale: -
∞ / +12,0 dB. Default: ∞ dB).
Section 6: Bass Boost
The Bass Boost in Roads MK1 Electric Piano is an EQ boost or cut around 175 Hz. The original
hardware uses a filter just to cut around the same frequency and its slope depends on the volume.
The effect of the Bass Boost EQ is noticeable on the lower keys on the keyboard, ranging from note
E0 to note E2.
Bass Boost
(Bass Boost): Determines the amount of EQ (Scale: 0 / 100. Default: 50).
Section 7: Volume
Volume
(Volume): Determines the master volume (Scale: -
∞
/ +12,0 dB. Default: 0,0 dB).
