2
Operating Instructions and Parts Manual
24898
9/17
2017 OEMTOOLS
™
16' DUCT ATTACHMENT
FOR 12" BLOWER FAN
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully.
Learn the product’s applications and limitations
as well as potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or
dark work areas invite accidents.
3. Keep children away. All children should be kept
away from the work area. Never let a child handle
tools or equipment without strict adult supervision.
4. DO NOT operate this product if under the
influence of alcohol or drugs. Read warning labels
on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is
any doubt, DO NOT attempt to operate.
5. Use safety equipment. Eye protection should be
worn at all times when operating this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat or hearing protection should be
used in appropriate conditions.
6. Wear proper apparel. Loose clothing, gloves,
neck-ties, rings, bracelets or other jewelry may
present a potential hazard when operating this
product. Keep all apparel clear of the product.
7. DO NOT overreach. Keep proper footing
and balance at all times when operating
this product.
8. Check for damage. Check equipment regularly.
If part of the product is damaged, it should be
carefully inspected to make sure that it can
perform its intended function correctly. If in doubt,
discontinue use of product.
9. Keep away from flammables. DO NOT attempt
to operate this product near flammable materials
or combustibles. Failure to comply may cause
serious injury or death.
10. Store this product out of the reach of children
and untrained persons. This product may be
dangerous in the hands of untrained users.
11. Keep this product dry and clean.
12. Use only accessories that are recommended by
the manufacturer for your model. Accessories
that may be suitable for one product may become
hazardous when used on another product.
13. Service must be performed only by qualified
repair personnel. Service or maintenance
performed by unqualified personnel could result in
a risk of injury.
14. When servicing a product, use only identical
replacement parts. Use of unauthorized parts or
failure to follow maintenance instructions may
create a risk of injury.
15. Maintain a safe working environment. Keep the
work area well lit. Make sure there is adequate
surrounding workspace. Keep the work area free of
obstructions, grease, oil, trash, and other debris.
DO NOT use this product in a damp or wet location.
16. Maintain labels and nameplates on this product.
These carry important information. If unreadable
or missing, contact OEMTOOLS
™
for a
replacement.
17. Keep this product dry, clean, and free from brake
fluid, oil, and grease.
18. Avoid accidental fire. DO NOT smoke near this
product.
19. The warnings, precautions, and instructions
discussed in this manual cannot cover all possible
conditions and situations that may occur. The
operator must understand that common sense and
caution are factors which cannot be built into this
product, but must be supplied by the operator.
20. We believe the information contained herein to be
reliable. However, general technical information
is given by us without charge and the user shall
employ such information at their own discretion
and risk. We assume no responsibility for results
or damages incurred from the use of such
information in whole or in part.
21. The manufacturer declines any and all
responsibility for property damage or injury if said
damage is the result of unskillful handling by the
operator or of failure to observe the basic safety
rules set forth in the instruction manual.
22. The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
23. The use of this equipment is simple and
straightforward if you follow the instructions.
When operating this equipment, use common
sense, and only use this equipment for its
intended purpose.
PRODUCT DESCRIPTION
The OEMTOOLS
™
16
'
Duct Attachment is designed
for use with the OEMTOOLS
™
24897 Cylinder Blower
Fan. This attachment can also be used with other 12"
blower fans with cylinders less than 13.5" in diameter.
PRODUCT SPECIFICATIONS
Fitment
24897 and other 12"
Blower Fans
Duct Length 16'
Weight
8.6 Lbs.
Material Vinyl
CONTENTS
(1) Duct Attachment, (1) Instruction Manual
