6
Operating Instructions and Parts Manual
24862
21 GALLON OIL DRAIN
VACUUM AND EXTRACTOR
DRAINING THE RESEVOIR
1. Set the caster brakes. Close the release valve (5) on the side of the Drain Tube.
NOTE
If valve is not closed, waste oil will shoot out of the funnel and spray the user.
2. Secure the discharge hose to the bulk waste oil tank and open the discharge hose valve.
3. Set the air supply to a maximum of 7 psi (0,5 bar).
Do not exceed 7 psi (0,5 bar). Failure to comply may result in serious personal
injury
4. Connect air supply to valve stem using air chuck tire inflator.
5. Remove air chuck from valve stem when desired flow rate is achieved or if safety relief valve opens.
NOTE
If flow rate stops before drain is empty, repeat steps 3, 4, and 5.
MAINTENANCE
1. Relieve pressure or vacuum before inspecting or servicing
2. Always store the Waste Oil Drain - Extractor in a well-protected area where it will not be exposed to
inclement weather, corrosive vapors, abrasive dust, or any other harmful elements.
3. Keep the Waste Oil Drain - Extractor clean for better and safer performance.
4. Inspect Reservoir, Hoses, Caps, Gaskets, Seals, and Gauge periodically, and if damaged, replace them.
WARNING
WARNING
05/19
2019 OEMTOOLS™