3
Operating Instructions and Parts Manual
24834
09/14
2014 ©OEM-TOOLS
FOLDING
ENGINE STAND
the scope of this manual to properly describe the
correct procedure and test data for each vehicle.
• Always perform vehicle service in a properly
ventilated area. Never run an engine without
proper ventilation for its exhaust. Stop work and
take necessary steps to improve ventilation in the
work area if you develop momentary eye, nose, or
throat irritation as this indicates inadequate ventilation.
• Engine parts that are in motion and unexpected
movement of a vehicle can injure or kill. When working
near moving engine parts, wear snug fit clothing and
keep hands and fingers away from moving parts.
Keep hoses and tools clear of moving parts. Always
stay clear of moving engine parts. Hoses and tools
can be thrown through the air if not kept clear of
moving engine parts.
• The unexpected movement of a vehicle can injure
or kill. When working on vehicles always set the
parking brake or block the wheels.
• Avoid accidental fire and/or explosion. Do not
smoke near engine fuel and battery components.
• The warnings, precautions, and instructions discussed
in this manual cannot cover all possible conditions
and situations that may occur. The operator must
understand that common sense and caution are
factors which cannot be built into this product, but
must be supplied by the operator.
• For safety purposes and the prevention of damage to
expensive components it is advised that the user
have an understanding of basic automotive repair
and a working knowledge of automotive systems.
• We believe the information contained herein to be
reliable. However, general technical information
is given by us without charge and the user shall
employ such information at their own discretion and
risk. We assume no responsibility for results
or damages incurred from the use of such information
in whole or in part. Always refer to specific
instructions and technical information supplied
by vehicle manufacturer.
• The manufacturer declines any and all responsibility for
damage to vehicles or components if said damage
is the result of unskillful handling by the operator
or of failure to observe the basic safety rules set
forth in the instruction manual.
• This equipment is intended only for professional
use by personnel trained in performing the service
functions for which it is has been designed.
• This equipment is designed for servicing a variety
of vehicles in a safe, convenient manner. However,
differences in vehicle makes and models may
make it impossible to use this equipment as it is
intended. Do not attempt to force the use of this
equipment on an application for which it is not
designed to perform.
• The procedures documented in this manual are to
serve as guidelines for the use of this equipment.
• In addition to these guidelines, always follow the
manufacturer’s recommended procedures when
servicing each unique vehicle.
• The use of this equipment is simple and straight-
forward if you follow the instructions. When operating
this equipment, use common sense, and always stop to
think before using a Transmission Jack or lifting a vehicle
PRODUCT SPECIFICATIONS
Weight Capacity: 2000 Lbs.
Base Size (L x W) (Legs Down) 43” x 37”
Height (Legs Up) 38”
Head Plate (L x H x Thickness) 9-3/4” x 5-3/4” x 1/2”
Wheel Diameter 3 -1/2”
PRODUCT DESCRIPTION
This Engine Stand is designed to safely support a
rated capacity engine during the time that the engine is
being rebuilt or repaired.
NEVER use for any purpose other than those uses
outlined above!
Verify that the product and application are compatible,
if in doubt call OEMTOOLS at 1-866-458-2472.
• Before using this product, read the operator’s
manual completely and familiarize yourself
thoroughly with the product, its components and
recognize the hazards associated with its use.
• Wear appropriate safety gear, including heavy-duty
work gloves and ANSI-approved safety goggles
during use.
• Do not exceed the weight capacity of the Engine
Stand. Make sure weight is evenly distributed. Be
aware of dynamic loading! Sudden load movement
