Oemtools 24663 Скачать руководство пользователя страница 8

8

Operating Instructions and Parts Manual 

24663

4-1/2" ANGLE GRINDER

4/18

2018 OEMTOOLS

OEMTOOLS

 ONE YEAR WARRANTY

For up to one year from the date of purchase of this OEMTOOLS™ product you find any defect in material or 
workmanship, through normal usage, return it to the place of purchase or to OEMTOOLS™ for repair or replacement 
at our discretion. In order to obtain this service, send your tool and proof of purchase, transportation pre-paid, to 
OEMTOOLS™ Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118. We will not be responsible for lost or 
damaged goods during transportation; please insure your package. If our inspection verifies the defect, we will either 
repair or replace the product at our election, or we may elect to refund the purchase price if we cannot readily and 
quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is 
no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of 
returning the product.
 
OEMTOOLS™ does not provide warranty for products labeled other than OEM® or OEMTOOLS™. OEMTOOLS™ will 
not provide any warranty for products subjected to abnormal use. Abnormal use includes, but is not limited to, abuse, 
accident, alteration, neglect, and unauthorized or unreasonable use or repairs. This warranty does not cover bits, 
blades, files, batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits, 
files, and batteries as necessary. OEMTOOLS™ reserves the right to make any changes in construction or design at 
any time without any obligation in incorporating such changes to tools or equipment previously sold.
 
OEMTOOLS™ makes every effort to ensure that its products meet high quality and durability standards, and warrants 
to the original purchaser that this product is free from defects in materials and workmanship for the period of one 
year from the date of purchase. This warranty does not apply to damage due directly or indirectly to misuse, abuse, 
negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear 
and tear or to lack of maintenance.
 
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or 
consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY 
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS. This warranty gives you specific legal rights, and you may also have other rights, 
which vary from state to state. 

 

 

CONTACT US

3580 E. Raines Road, Suite 3, Memphis, TN 38118

Tel: 1-866-458-2472

www.oem-tools.com

Содержание 24663









Отзывы: