6
Operating Instructions and Parts Manual
24454
PPS-MARINE PERSONAL POWER
SOURCE WITH JUMPER CABLES
MAINTENANCE
Very little maintenance is required for the OEMTOOLS
Portable Power Source. Follow common sense in
wiping the charger clean and store in a clean, dry area.
1. After use, wipe all battery corrosion and other dirt
or oil from clip, cord, and the OEMTOOLS Portable
Power Source case. Use a dry cloth.
2. Coil charger cords to prevent damage.
3. Replace any cracked or frayed cords.
4. Store the OEMTOOLS Portable Power Source in a
clean, dry area.
Figure
Description
Quantity
A
Portable Power
Source Battery Unit
1
B
5V-2A USB Port with
Pigtail Adapters
1
C
Wall Charger
1
D
Auto Charger
1
E
Jumper Cables
1
F
Watertight
Storage Case
1
G
Rubber Bumper
1
(B)
5V-2A USB Port with
Pigtail Adapters
(A)
Portable Power
Source Battery Unit
(C)
Wall
Charger
(D)
Auto Charger
(E)
Jumper Cables
(G)
Rubber Bumper
(Battery Unit Not Included)
(F)
Watertight
Storage Case
Composition and amount of toxic and harmful substances in "The Tiny"
Portable Power Source
Pb
Hg
Cd
Cr(Vi)
PBB
PBDE
0
0
0
0
0
0
0: Indicate all homogeneous materials' hazardous substances content are
below the MCV limit specified in the Standard 2002/95/EC(RoHs).
TOXIC AND HARMFUL SUBTANCES:
Composition and amount of toxic and harmful substances in the
Multi-Use Portable Power Source with Jumper Cables.
TROUBLE SHOOTING:
3/16
2016 ©OEMTOOLS
Problem
Cause
Remedies
The OEMTOOLS
Portable Power
Source is still not
fully charged while
it’s 5 indicator
lights are solid.
Charger may auto
stop at 60% if
battery is very
low to prevent
damage.
Unplug the adapter
and plug it in again.
No response
when pressing the
switch button.
Low voltage
protection of
the OEMTOOLS
Portable Power
Source.
Plug the adapter into
the 12V 1A input port
to activate.
