5
Operating Instructions and Parts Manual
23980
12/18
2018 OEMTOOLS
™
24" OSCILLATING
MISTING WALL MOUNT FAN
5. Assemble the front guard (1) to the rear guard (2) by
attaching both guards together with clips.
1
2
6. Secure the assembly on the front guard and rear guard
by tightening the screw (1), washer (2) and nut (3) on
the bottom position of each.
1
2
2
3
7. Hang the fan head on the bracket and fasten it with a
screw, a connecting plate, a washer, a spring washer,
and a nut. Fasten the screw that holds the vertical fan
head on the bracket. Attach the knob for adjusting the
tilt angle of the fan head.
1
5
6
7
2
3
4
8. Loosen the washer nut (1) and adjust until the fan head
is at the desired angle. Tighten the washer nut.
1
9. Insert the screw (1) through the upper bracket. Connect
the lower bracket to the upper bracket with a screw (1).
Fasten the two brackets with a spring washer (2) and
hexagon nut (3).
10. Connect the misting switch (1) to the water pipe (2) and
tighten it. Turn the switch (open) to open the misting
function. Turn the switch (close) to close the misting
function.
1
2
Open
Loose
Tight
3/4" Internal Thread
3/4" Water Pipe Terminal 3/4"14 External Thread
Close
1
2
3
