When the convector is switched on:
1.Turn the thermostat knob in a clockwise direction to the max position.
2.Once the room temperature has reached the desired temperature, turn the thermostat knob slowly
in an anti-clockwise direction until a "click" sound is heard. That is the setting temperature. Now, the
convector is switched off and the indicator lights off.
3.The convector will automatically maintain the set temperature. It will switch on when the room
temperature is below and switch off if above the setting.
4.The red indicator show that the convector is switched on.
SAFETY DEVICE
This appliance is provided with two safety devices which will switch off the heater in case of
accidental overheating. To reset, disconnect the plug from the power for a few minutes, remove the
cause of overheating, then plug the appliance in again. If it still cannot be reset, ask a qualified
technician to check and repair.
MAINTENANCE:
The fan heater only needs regular cleaning on the outside.
Before you clean the unit, turn the switch to OFF. Remove the plug from socket and wait until the
fan heater cools down.
Use a damp cloth to wipe the heater housing.
Do not use sweater, detergents, abrasive cleaning liquids or chemical agents (alcohol, gasoline etc.)
to clean the unit.
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the product
was purchased. They can take this product for environmental safe recycling.
WARNING: To avoid overheating, do not cover the heater
Any questions, please contact us through Amazon message or send us an email to [email protected].
cn. We will reply as soon as we can and solve your concerns. Please do leave us a review about the chopper if
it works fine. Enjoy the product! Thanks.
