OEM DRAUGHT CAP MOTORIZED 30, Инструкции по использованию и предупреждения

Страница: 10 / 66

EC-compliant use and warning instructions
CHAPTER 1 – IDENTIFICATION
Page 10
1.5 Reference Directives
The machine supplied by OEM ALI GROUP S.R.L A SOCIO UNICO does not belong to one of the categories of
machines listed in the list covered in Annex IV of the Directive; therefore, for the purpose of the declaration of
conformity of the machine to the present directive, OEM ALI GROUP S.R.L A SOCIO UNICO applies the procedure
of compliance assessing with internal control on the manufacture of the machine, see attached VIII.
In order to certify the machine's compliance with the provisions of the Directive, OEM ALI GROUP S.R.L A SOCIO
UNICO before to entry in the market , carried out the risk assessment in order to verify compliance with the essential
safety and health requirements provided by the Directive as well as the tests and checks provided by the relevant
reference rules. The technical construction file was produced in accordance with Annex VII of the 2006/42/CE
Directive and it is available to be verified by supervisory bodies on a reasoned application, as required by the relevant
legislation.
OEM ALI GROUP S.R.L A SOCIO UNICO provides the introduction on the market of the machine by equipping it and
accompanying it with:
CE Marking
CE Declaration of Conformity
Instruction and Warning Manual
(Documentation drawn up in paragraph 1.7.4 of the Machines Directive
2006/42/CE)
Please note that the oven was designed according to the following Guidelines:
2006/42/CE
Machines Directive
2014/30/UE
Electromagnetic Compatibility Directive