3
Operating Instructions and Parts Manual
24875
36” DRUM FAN
PURPOSE
The OEMTOOLS Fan 24875 is a 36” Drum Fan that not
only helps circulate the air and keep it in motion while
maintaining a fresh breeze but also helps to prevent the
inhalation of dangerous gasses and fumes by adding
ventilation
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
1. Unplug the fan before moving it or performing
maintenance. Do not touch the fan when your
hands are wet.
2. Those who are not qualified electricians should not
disassemble, repair or rebuild the fan.
3. Unplug the fan when it is not in use.
4. DO NOT unplug the fan by holding the cable cord.
Unplug by holding the plug.
5. DO NOT use the fan when there is damage to the
cable cord or plug.
6. Avoid the use of extension cords when possible.
Ensure that they are UL listed if they must be used.
DO NOT use a single extension cord to operate
more than one fan. DO NOT plug the fan into any
other cord-connected device (power strip, surge
protector, multiple outlet adapters ect.).
7. DO NOT use the fan close to any fire or heat
source.
8. DO NOT insert your hand or other objects into the
guard or the movable parts.
9. To reduce the risk of fire or electric shock, do not
use this fan with any solid-state speed control
device.
10. DO NOT use this fan outdoors.
11. Please don’t operate any fan with a damaged cord
or plug. Discard fan or return to an authorized
service facility for examination and/or repair.
12. Please don’t run cord under carpeting. Do not
cover cord with throw rugs, runners, or similar
coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area
and where it will not be tripped over.
13. DO NOT use if electrical cord is frayed or bent.
14. DO NOT immerse the fan.
15. Fit the guard onto fan before starting up the fan.
16. This fan is not intended for use by people
(including children) with reduced physical, sensory
or mental capabilities or lack of experience
and knowledge unless they have been given
supervision or instructions concerning use of
the fan by a person responsible for their safety.
Supervise children to ensure they do not play with
the fan.
17. Always place the fan on a stable, flat, level surface
when operating, to avoid the chance of the fan
overturning.
18. DO NOT immerse fan in water.
OPERTATING INSTRUCTIONS
1. The fan comes with two different speeds.
2. Switch the fan on by turning the switch knob to
speed 1 or 2.
3. To switch the fan off, turn the switch knob to 0.
4. Assemble the wheel as the instruction of wheel
assembly drawing before operating.
DO NOT depend upon the on-off switch as the sole
means of disconnecting power when installing or
servicing the fan. Always unplug the power cord.
12/14
2014 ©OEMTOOLS
Size
36”
Weight
62 Lbs.
Voltage
120 V/60 Hz
Current
4.4 A
PRODUCT SPECIFICATIONS
WARNING
CAUTION
WARNING