3
Operating Instructions and Parts Manual
25811
1" SQUARE DRIVE
IMPACT WRENCH WITH 6" ANVIL
12/20
2020 OEMTOOLS
®
5. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
6. Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
7. Hold power tool by insulated gripping surfaces when
performing an operation where the cutting tool may
contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the tool
"live" and shock the operator.
8. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding the
work by hand or against your body leaves it unstable
and may lead to loss of control.
9. DO NOT use this Impact Wrench for tasks it was not
designed to perform.
10. Never lay workpiece on hard surfaces like concrete,
stone, etc.
11. The Impact Wrench is wired at the factory for 110–120V
operation. It must be connected to a 110–120V, 15A
time delayed fuse or circuit breaker. To avoid shock or
fire, replace power cord immediately if it is worn, cut or
damaged in any way.
12. Avoid accidental starting. Be sure switch is OFF before
plugging in.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
WARNING
:
1. Know your Impact Wrench. Read the Owner’s Manual
carefully. Learn the tool’s applications and limitations,
as well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
2. Always wear eye protection. Any power tool can throw
foreign objects into your eyes and cause permanent
eye damage. ALWAYS wear safety goggles (not
glasses) that comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant lenses.
They ARE NOT safety glasses. Glasses or goggles not
in compliance with ANSI Z87.1 could cause serious
injury when they break.
3. Always use hearing protection when operating the
Impact Wrench.
4. Hold power tool by insulated gripping surfaces when
performing an operation where the fastener may
contact hidden wiring or its own cord. Fasteners
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
5. Use only impact sockets and accessories that are
designed for use with an Impact Wrench. DO NOT use
chrome plated sockets and accessories. Chrome plated
sockets and accessories are designed for hand use only
and MUST NOT be used with an Impact Wrench. They
may shatter and possibly cause serious injury.
6. Before each use, check the impact sockets and
accessories for excessive wear or cracks. Worn or
damaged sockets or accessories may shatter and
possibly cause serious injury. Worn accessories may
allow the socket to come off during operation of the
Impact Wrench.
7. Never use the Impact Wrench as a torque wrench.
Always use a torque wrench to adjust the fastener to
the specified torque.
8. Keep the Impact Wrench handle and body clean and
free of oil and grease. Always use a clean dry cloth
when cleaning. DO NOT use solvents, brake fluid,
gasoline or other petroleum products to clean the tool.
They will damage the tool.
9. DO NOT wear neckties or loose clothing.
10. When wearing gloves, they must be tight fitting and slip
resistant type. Leather gloves offer the best protection.
11. Always use two hands when operating the Impact
Wrench. Use one hand on the handle and the other on
the front of the tool body.
12. Never place your hand so it is touching the socket or
accessory when the tool is turned ON. Your hand could
be seriously injured.
13. Always remove the plug from the power source before
installing or removing any socket or accessory.
14. Be ready for components to shift when removing any
fastener. The speed of the fastener removal could
cause unexpected shifting of the components.
15. DO NOT disassemble the Impact Wrench. Take it to a
qualified professional when service or repair is required.
16. Never hold the workpiece in one hand and the tool in
the other hand when in use.
