4
Operating Instructions and Parts Manual
24846
1,250 Lbs.
ROTATING ENGINE STAND
3/17
2017 OEMTOOLS™
CAUTION
1.Do not exceed the maximum capacity of 1250lbs
2.Use only on hard level surface.
3.Never attempt to move loaded stand across floors having cracks or other obstacles which
might impede movement of wheels.
4. Never work directly under a supported engine.
5. Be sure load and stand are stable.
6. Periodically inspect stand to insure its safe operation.
7. Failure to follow any of these instructions may result in property damage and/or
personal injury
CONTACT US
3580 E. Raines Road, Suite 3, Memphis, TN 38118
Tel: 1-866-458-2472
www.oem-tools.com
OEMTOOLS™ ONE YEAR WARRANTY
If for up to one year from the date of purchase of this OEMTOOLS™ product, you find any defect in material or workmanship, through normal usage, return it
to the place of purchase, or to OEMTOOLS™ for repair or replacement at our discretion. In order to obtain this service, send your tool and proof of purchase,
transportation pre-paid, to OEMTOOLS™ Q.A. Dept., 3580 E. Raines Road #3, Memphis, TN 38118. We will not be responsible for lost or damaged goods during
transportation; please insure your package. If our inspection verifies the defect, we will either repair or replace the product at our election, or we may elect to
refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine
there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
OEMTOOLS™ does not provide warranty for products labeled other than OEM
®
or OEMTOOLS™. OEMTOOLS™ will not provide any warranty for products
subjected to abnormal use. Abnormal use includes, but is not limited to, abuse, accident, alteration, neglect, and unauthorized or unreasonable use or repairs.
This warranty does not cover bits, blades, files, batteries, or calibration. We recommend that you maintain your tools and sharpen or replace blades, bits, files,
and batteries as necessary. OEMTOOLS™ reserves the right to make any changes in construction or design at any time without any obligation in incorporating
such changes to tools or equipment previously sold.
OEMTOOLS™ makes every effort to ensure that its products meet high quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of one year from the date of purchase. This warranty does not apply to damage due directly or
indirectly to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear or
to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply
to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
Don’t forget to register your new OEMTOOLS™ product at www.oem-tools.com.
NOTE:
Not all components of the Engine Stand are replacement items, but are illustrated as a
convenient reference for location and position in the assembly sequence. The manufacturer and/or
distributor have provided the parts list and assembly diagram in this manual as a reference tool only.
Neither the manufacturer nor distributor makes any representation or warranty of any kind to the buyer
that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any
parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts
replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer
assumes all risk and liability arising out of his or her repairs to the original product or replacement parts
thereto, or arising out of his or her installation of replacement parts thereto.
PARTS LIST
PARTS DIAGRAM
Figure Description
Qty.
1
Nut
4
2
Washer
4
3
Washer
4
4
Bolt
4
5
Head Pipe
4
6
Nut
7
7
Bolt
3
8
Worm Gear Box Assembly
1
9
Bolt
3
10
Handle Gasket
1
11
Handle Assembly
1
12
Supporting Rod
2
13
Bolt
2
14
Washer
7
15
Base
1
16
Wheel
4
17
Washer
24
18
Washer
24
19
Wheel
2
20
Washer
8
21
Pin
2
22
Base Pipe
2
23
Pin
2
24
Bolt
2
25
Cover
4
