background image

3

Operating Instructions and Parts Manual 

24552

3/19

2019 OEMTOOLS

THERMAL IMAGING CAMERA

SPECIFIC SAFETY INSTRUCTIONS  

AND WARNINGS

WARNING

:

 Be sure to keep exposed skin and flammable clothing 

away from hot components being viewed with the Thermal Imaging 

Camera. Take appropriate precautions when working near electrical or 

moving parts. 
THIS DEVICE IS NOT FOR MEDICAL USE AND SHOULD NEVER BE USED 

AS A HEALTH OR MEDICAL CARE DEVICE.

CAUTION

:

 Keep the Thermal Imaging Camera at a safe distance 

from hot components being viewed. Failure to due so may cause damage 

to the camera.
DO NOT point the Thermal Imaging Camera at strong energy sources 

such as devices that cause laser radiation, or the sun. This can 

negatively affect the accuracy of the camera and may cause damage to 

the detector in the camera.
DO NOT use the camera on temperatures higher than the rated 

maximum temperature. Exceeding the temperatures specified can cause 

damage to the camera.
DO NOT use solvents or harsh chemicals to clean the infrared lens. This 

can cause damage to the lens and prevent the camera from operating 

properly.

CONTENTS

1 Thermal Imaging Camera, 1 Storage Pouch, 1 Mini USB cable

INITIAL SETUP

1.   Carefully remove the unit from the packaging and visually inspect to 

familiarize yourself with the features and controls.

 

Figure Description

1

Power Button

2

Infrared Lens

3

Mini USB Port and  

microSD Slot

4

Capture Image Trigger

5

Battery Cover

1

3

2

4

5

2.  Using a small screwdriver, open the battery 

cover by removing the small screw that 

secures the cover. Install 4 AAA batteries, 

reinstall the battery cover, and tighten the 

screw. Be careful not to overtighten.

3.  Press and hold the power button, located 

at the top of the unit, for 2-3 seconds until 

the start screen appears.

4.  Press the “OK” button on the control pad once. This will display the 

settings menu. Use the Arrow 

 or 

 buttons to select the 

setting field that you want to adjust and press “OK”.

5.  Once you have chosen the options that best suit your needs, use the 

Return button   to start using the unit.

Memory Card

Temperature Unit

Color Palettes

Date

Emissivity

Auto Shutoff

Содержание 24552

Страница 1: ... the continued safe use of your tool Failure to follow instructions listed below may result in serious injury In addition make sure that anyone who uses the equipment understands and follows these safety instructions as well Operating Instructions and Parts Manual 24552 FOR CUSTOMER SERVICE Technical Question CALL 1 866 458 2472 customerservice oem tools com Thank you very much for choosing an OEM...

Страница 2: ...e oil trash and other debris DO NOT use this product in a damp or wet location 15 Avoid accidental fire and or explosion DO NOT smoke near engine fuel and battery components 16 The warnings precautions and instructions discussed in this manual cannot cover all possible conditions and situations that may occur The operator must understand that common sense and caution are factors which cannot be bu...

Страница 3: ...OT use solvents or harsh chemicals to clean the infrared lens This can cause damage to the lens and prevent the camera from operating properly CONTENTS 1 Thermal Imaging Camera 1 Storage Pouch 1 Mini USB cable INITIAL SETUP 1 Carefully remove the unit from the packaging and visually inspect to familiarize yourself with the features and controls Figure Description 1 Power Button 2 Infrared Lens 3 M...

Страница 4: ...r installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS ...

Отзывы: