3
Operating Instructions and Parts Manual
24219
SPARE TIRE
REMOVAL SET
5/19
2019 OEMTOOLS
™
APPLICATION CHART
1
2
3
4
5
Figure Description
Quantity
1
Small Square
Attachment
Ford F-Series 2005-Newer*
2
Large Square
Attachment
Newer GM Suburbans, Tahoe*
Newer Dodge Pickups*
3
Hex Attachment Older Dodge Pickups*
Older Chevy HD Pickups*
4
Flat Blade
Attachment
Ford Trucks up to 2004,
E-Series Vans, Rangers*
GM Vans, Light Duty Trucks
1990-1999, S-10*
5
T-Shaped
Attachment
Toyota Trucks and SUVs*
Nissan Trucks and SUVs*
*May not fit all years/models
OPERATION
1. Use the application chart to select the correct
attachment for your vechicle.
2. Push the spring-loaded button on the shaft to release
the locking sleeve. Pull the locking sleeve back toward
the shaft to expose the threaded stud.
3. Screw the selected attachment (Step #1) to the
exposed threaded stud. Leave a 1/8" gap between the
shaft and the end of the attachment.
4. Return the locking sleeve to the original position, until
the spring-loaded button re-engages. Ensure the
locking sleeve is secure before use; the locking sleeve
should cover the bottom of the shaft during use.
5. Attach the handle to the opposite end of the shaft by
inserting the end of the shaft into the handle socket.
STORAGE
1. Always store the Spare Tire Removal Set in a well-
protected area where it will not be exposed to
inclement weather, corrosive vapors, abrasive dust, or
any other harmful elements.
Parts Diagram
8
6
1
2
3
4
5
7
Parts List
Figure Description
Quantity
1
Small Square Attachment
1
2
Large Square Attachment
1
3
Hex Attachment
1
4
Flat Blade Attachment
1
5
T-Shaped Attachment
1
6
Shaft
1
7
Handle
1
8
Case
1
Note: Not all components of the Spare Tire Removal Set
are replacement items, but are illustrated as a convenient
reference for location and position in the assembly
sequence. The manufacturer and/or distributor have
provided the parts list and diagram in this manual as a
reference tool only.
Please read the following carefully.
OEMTOOLS
™
and/or its distributors have provided the
parts list and assembly diagram as a reference only.
Neither OEMTOOLS
™
nor its distributors make any
representation or warranty of any kind to the buyer and/
or user of this tool that he or she is qualified to do any
repairs or replace any parts of this product. OEMTOOLS
™
and its distributors expressly state that all repairs or parts
replacement should be done by certified or licensed
technicians. The buyer assumes all risk and liability
arising out of his or her repairs or parts replacement to
the original production.
Shaft
Button
Button
Shaft
Shaft
Shaft
Shaft
Locking Sleeve
Locking Sleeve
Shaft
Handle
Attachment
Attachment
Approximate 1/8" Gap
Locking Sleeve
Locking Sleeve Hole
Threaded Stud
