2
Operating Instructions and Parts Manual
22505
1/22
2022 OEMTOOLS
®
1 LITER PNEUMATIC BRAKE BLEEDER
WITH AUTOMATIC REFILLING BOTTLE
IMPORTANT INSTRUCTIONS
AND SAFETY RULES
1. Know your product. Read this manual carefully. Learn the product’s
applications and limitations, as well as potential hazards specific
to it. The use of this product is simple and straightforward if you
follow the instructions. When operating this product, use common
sense and only use this product for its intended purpose.
2. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS
®
for a replacement.
3. Maintain this product with care. Keep it dry and clean – and free
from brake fluid, oil, and grease (if applicable).
4. Check for damage. Check your product regularly. If part of the
product is damaged, it should be carefully inspected to make sure
that it can perform its intended function correctly. If in doubt, the
part should be repaired. Refer all servicing to a qualified technician.
Consult your dealer for advice.
5. Check for misalignment or binding of moving parts, breakage
of parts, and any other condition that may affect the product’s
operation.
6. DO NOT use a damaged product. Tag damaged products “DO NOT
USE” until repaired. If damaged, have the product serviced before
using. Many accidents are caused by poorly maintained products.
7. Service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
create a risk of injury.
8. When servicing a product, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions could create a risk of injury.
9. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one product
may become hazardous when used on another product.
10. Keep work area clean and well lit. Cluttered or dark work areas
invite accidents.
11. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the
work area free of obstructions, grease, oil, trash, and other debris.
DO NOT use this product in a damp or wet location.
12. Keep children away from the work area. Never let a child handle
this product without strict adult supervision.
13. Store this product out of the reach of children and untrained
persons. This product may be dangerous in the hands of untrained
users.
14. DO NOT operate this product if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if your
judgment or reflexes are impaired while taking drugs. If there is
any doubt, DO NOT attempt to operate.
15. Use safety equipment. Eye protection should be worn at all times
when operating this product. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.
16. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this product. Keep all apparel clear of the product.
17. DO NOT overreach. Keep proper footing and balance at all times
when operating this product.
18. Keep away from flammables. DO NOT attempt to operate this
product near flammable materials or combustibles. Failure to
comply may cause serious injury or death.
19. Avoid accidental fire and/or explosion. DO NOT smoke near engine
fuel and battery components.
20. We believe the information contained herein to be reliable.
However, general technical information is given by us without
charge and the user shall employ such information at their own
discretion and risk. We assume no responsibility for results or
damages incurred from the use of such information in whole or in
part. Always refer to specific instructions and technical information
supplied by vehicle manufacturer.
21. The manufacturer declines any and all responsibility for property
damage or injury if said damage is the result of unskillful handling
by the operator or of failure to observe the basic safety rules set
forth in the instruction manual.
22. The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that
may occur. The operator must understand that common sense
and caution are factors which cannot be built into this product, but
must be supplied by the operator.
PRODUCT DESCRIPTION
The OEMTOOLS
®
22505 1 Liter Pneumatic Brake Fluid Bleeder
with Automatic Refilling Bottle accurately tests and services many
different pressurized systems on your vehicle. Easily bleed brakes,
test automotive vacuum systems and more with this durable vacuum
pump/brake bleeder.
PRODUCT SPECIFICATIONS
Pneumatic Bleeder
Vacuum
60%
Tube Length
70"
Container Capacity
1 Liter
Air Consumption
180ltr/min
Air Inlet Size
1/4" – 18 NPT
Inlet Air Pressure
87 to 174 psi
Automatic Refilling Bottle
Height
11"
Width
4.3"
Spout Length
1.79"
Spout Outside Diameter
0.65"
Clamp Range
0.67"
Container Capacity
1 Liter
OPERATING INSTRUCTIONS
PNEUMATIC BRAKE BLEEDER
1. Turn the vehicle’s engine off and chock the vehicle’s wheels to
prevent the vehicle from moving.
2. Fill the Automatic Fluid Refilling Bottle with clean, new brake fluid.
Only use the type of brake fluid recommended by the vehicle
manufacturer. Screw the Fill Nozzle onto the Refilling Bottle.
3. Close the Lever on the Fill Nozzle.
4. Remove the cap from the vehicle’s master cylinder. Position the
bottle onto the master cylinder reservoir and adjust the swivel
clamp to properly attach the bottle.
5. Open the Automatic Refilling Bottle Lever.
6. Screw the Gun firmly onto the Fluid bottle, then connect the
Bleeding Hose to the Fluid Bottle.
7. Determine the proper brake bleeding sequence from the vehicle
service manual. (i.e., right rear caliper, left rear caliper, right front
caliper, left front caliper).
8. Clean the vehicle brake caliper with brake parts cleaner (not included).
