PAGER LX4
USER MANUAL
© 2022 Oelmann Elektronik GmbH
21 / 25
GUIDELINES FOR CLEANING PAGERS
Applies to following Oelmann pagers: LX2, LX4, LX7, LX8, TETRA, WIFI pager.
Oelmann pagers are made with a variety of materials, and each material might have
specific cleaning requirements. Here are tips that apply to all pagers:
– Unplug all external power sources, devices, and cables.
– Gently wipe the surfaces of your Oelmann pager, such as the display, buttons,
and other exterior surfaces.
– Pagers can remain ON while wiping.
– Make sure the pager is completely dry before use.
Notes:
– Use a soft, lint-free cloth. Avoid abrasive cloths, towels, paper towels, or similar
items.
– Avoid excessive wiping, which might cause damage.
IMPORTANT NOTES:
– Don't get moisture into any openings of the pager.
– Don't submerge the pager in any cleaning agents.
– Don't use aerosol sprays, bleaches, or abrasives.
– Don't spray cleaners directly onto the device.
– Keep liquids away from the device.
Use a disinfectant on an Oelmann pager:
Using a 70% isopropyl alcohol wipes, any EPA-registered chemicals wipes, or the
wipes with Accelerated Hydrogen Peroxide (AHP).
Don’t use bleach
.
Cleaning the pager accessories
Belt holster, charger: same as above to
wipe them down. Make sure they’re
completely dry before use.
Note for LX2, LX4, LX8 Series Pager
chargers:
– Wipe the inside of the with extreme
care.
– Do not spill liquid into the devices.
– Do not damage the pin contacts.
How often to clean a pager
It is safe to clean a pager daily.
Warranty note
If liquid makes its way inside your Oel-
mann product then do not use it, and get
help from an Oelmann Authorized Part-
ner or Oelmann Elektronik GmbH direct
as soon as possible. Liquid damage isn't
covered under the Oelmann product
warranty.
