lntroduction
This digital humidity and temperature meter is characterised by its quick
response time and high precision when measuring the temperature and air
humidity in the direct environment.
LC display
Operation
•
Power supply: Open the battery compartment and insert a 9 Volt
monobloc battery (CR-V9) or a corresponding rechargeable battery.
•
Turn on: Hold the power button until the full display appears on the LCD.
•
Turn off: Hold the power button until the display disappears from the LCD.
•
Battery icon: A visible battery icon indicates the battery is about to be
exhausted. If the icon is also flashing, the battery should be replaced
immediately.
•
Backlight: Turn on the device and press the power button again to activate
or deactivate the backlight. The backlight will turn off automatically if there
is no further operation for 30 minutes.
•
Display change °C / °F: In shutdown mode, press “MAX” first, and while
holding the button, press the power button additionally. Then release both
simultaneously. This is how you can switch from °C to °F and vice versa.
•
Measurement: As soon as the meter has been turned on, it measures the
temperature and air humidity automatically. The actual values can be read
off the display. In order to save a reading in the display, briefly press “MAX”.
“HOLD” appears on the display. The reading is now “frozen” on the display
and remains visible until you press “MAX” again briefly and the actual
reading is displayed then.
•
MIN- / MAX-values: Press the “MAX” button for more than a second.
The highest measured value is displayed now. Another brief pressing of the
“MAX” button indicates the lowest measured value. In order to leave this
mode, press “MAX” again and hold the button for more than a second.
Parameter
Dimensions (H x W x D): 152 x 52.5 x 35.5 mm
Notes
Clean the instrument with a cloth only. Do not use any solvents or liquids.
Remove the battery if the instrument is expected not to be in use for a
longer time.
OEG GmbH
Industriestraße 1 • D-31840 Hess. Oldendorf
[email protected] • www.oeg.net
Kostenfreie Bestell- und Service-Hotline:
Fon 0800 6 343662 • Fax 0800 6 343292
D
Free service number:
Phone 00 800-63 43 66 24 • Fax 00 800-63 43 29 24
GB
10196720
Humidity & Temperature Meter
Instruction Manual
lntroduction
LCDdisplay
Operation
Humidity & Temperature Meter
This digital humidity and temperature meter features high
precision, quick response and high stability, can measure the
temperature and humidity of the local environment for further
analysis.
This unit has been widely applied in household, intelligent
estate, subway, shopping mall for process control.
low battery
humidity icon
°C
/
°Ftemperature unit
humidity reading
temperature reading
hold-on icon
high/low temperature icon
MIN/MAX reading
1
.
Open the battery door and insert the battery(006 or NEDA1604 or
IEC6F22)
Turn on: press the power button for about 1 second until the full
display appears on the LCD.
Turn off: press the power button for 3 seconds above until all the
display disappears on the LCD.
Battery icon: indicating 3 status of battery, when the battery is full
the icon displays, and icon indicating the battery is about to
be exhausted, the icon flashing indicating the battery must be
replaced immediately.
Backlight: turn the power on and press the power once to activate
or inactivate the backlight, and the backlight will turn off
automatically if there is no further operation for 30 seconds.
Press the MAX button
MAX/MIN:Press MAX for 3 seconds above, the MAX appears
on the LCD, then release the button to enter into MAX/MIN
measure mode; under this mode, press once this button to show
the MIN for the minimum reading measured. Press the button
2
.
3
.
4
.
5
.
6
.
for 3 seconds above to exit this mode.
7.
unit conversion function:
Under shutdown mode, press "MAX" first, then press power
button while holding down "MAX".
°C/°F
humidity
temperature
：
0%
～
100%RH
range
：
92.7g
weight
：
sizes
152*35.5*52.5mm
：-
30
℃ ～
70
℃
range
0%
～
20%RH
-
30
℃～
0
℃
20%
～
80%RH
0
℃～
70
℃
-
22
℉～
32
℉
32
℉～
158
℉
80%
～
100%RH
4
.
5
%
1
.
0
℃
3
.
0
%
0
.
5
℃
0.1
0.1
/
0
.
2
℉
℃
4.5
%
1
.
8
℉
0
.
9
℉
precision
precision
range
range
resolution
resolution
Parameters
Notes
1
.
2
.
3
.
4
.
This product has been calibrated before loading, do not change
the parameters without the presence of professionals and
equipment.
Amendment and maintenance must be kept by professionals
not just doing it with reference to the manual.
Clean the unit with cloth only without any solvent or liquid.
Take out the battery if the unit is expect not to be used.
!
Specific Declarations:
Our company shall hold no any responisibility resulting from using
output from this product as an direct or indirect evidence.
We reserves the right to modify product design and specification
without notice.
battery status indication
MIN/MAX values
humidity unit RH
humidity value in %
temperature unit (°C / °F)
temperature value
hold function active
icon for high /
low temperature
Temperature
Messbereich: -30 up to 70 °C
Humidity
Resolution
Accuracy
-30 up to 0 °C
0.1 °C / 0.2 °F
1.0 °C
0 up to 70 °C
0.5 °C
-22 up to 32 °F
1.8 °F
32 up to 158 °F
0.9 °F
Parameters
Humidity: 0 up to 100 % RH
Humidity
Resolution
Accuracy
0 up to 20 % RH
0.1 %
4.5 %
20 up to 80 % RH
3.0 %
80 up to 100 % RH
4.5 %
