OE Max Controls PGM-500, Руководство пользователя

Страница: 41 / 153

41
When you know the exact code of application command
Operand
Bit Register
For Bit register, you may or may not use dot classifying bit. For
instance, we will explain two methods. If you input R for register, 1 for
word address and 5 for bit, it'll be expressed as R001.05. In order to
input this,
Method 1) Input using Dot
It'll have the same meaning if you input as follows.
R001.5, R01.05, R01.5, R1.05, R1.5
Method 2) Input not using Dot
It'll have the same meaning if you input as follows.
R00105, R0105, R105
Key Input Order Screen display Note
1)
• The screen beside will be
displayed if you add command
at the end of program.
• If you change application
command, it will show
application command inverted.
2) • If user knows the code of add
command is 504, input 504
directly.
3)
• Select add command with Enter.
• After selecting command, you
shall input operand. You will see
that the status is changed from
command input mode to
operand input mode.
• For operand input, please refer
to
"Operand" on page 41
.
FUN
B
RST>
5
0
ORB<>
4
ENTER
Yes
TIP
• If it has no dot, the last two digit will be recognized as
bit. R15 is the same expression of R000.15.
• You can only input coil of Timer/Counter as operand
only by decimal number. (TC000 ~ TC255)