OE Max Controls PGM-500, Руководство пользователя

Страница: 19 / 153

19
Online Programming Editing
●
Connect in initial setup through on-line
●
When connecting in Online mode
1. Make program under the present status.
2. When you connect to other PLC connected in the next work under online
mode, do the following initial set up. Please refer to [4.9] "Modification of
connecting target and PLC" .
IMPORTANT
In on-line mode, the program loaded in the working
memory of PGM-500 is the same with the program
now run by PLC. Modification of working memory
will change the program run by PLC.
TIP
• Enabled when you connect through RS-485.
• Refer to Chap. 4. Basic operating procedures necessary
for programming.