CUTOUT FOR MULTIPLE QIKPAC CONNECTING SHOES
CUTOUT FOR SINGLE QIKPAC CONNECTING SHOE
(9.39”)
238.50
(1.84”)
46.70
(2.40”)
61.00
(1.06”)
26.81
(9.39”)
238.50
(1.38”)
35.00
REQUIRED
CABLE
CLEARANCE
(1.63”)
+ -
0.02 0.00
41.50
+ -
0.50 0.00
(9.31”)
236.50
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
(1.63”)
+ -
0.02 0.00
41.50
+ -
0.50 0.00
(1.63”)
+ -
0.02 0.00
41.50
+ -
0.50 0.00
(0.81”)
20.50
MIN
(9.31”)
236.50
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
CUTOUT SUITABLE FOR
1-3mm METAL PANEL
Power
Output
COMBINED OUTPUT
RATING 144W MAX
COMBINED OUTPUT
RATING 144W MAX
*SIT STAND MECHANISM CAN BE CONNECTED TO EITHER END OF THE QIKDOC,
BUT THE SECOND OUTPUT AT THE SAME END OF THE QIKDOC SHOULD NOT
THEN BE USED (OTHERWISE BATTERY OVERLOAD AND SHUTDOWN MAY OCCUR)
Power
Output
Power
Output
Power
Output
Power
Input
QIKPAC M4F (Docking)Connecting Shoe
Panel installation instructions
INSTR1303
www.oeelectrics.com
[email protected] / +49 (0)2261 958 3001
DE
-
[email protected] / 1300 ELSAFE (357 233)
AUS
-
[email protected] / +1 (844)-927-0600
U.S.A
-
[email protected] / +44 (0) 1924 367 255
UK
-
Cutout Dimensions
1
2
4
Single Connecting Shoe
Align Connecting Shoe with
cutout and snap into place
3
Connect GST08 interconnecting cable to
appropriate connector on underside of
connecting shoe with writing on the cable
facing up
Power inputs and outputs
Cables should
slot into place
easily.
Do not
force
Rear
View
NOTE: M4F Connecting Shoe is used for Appliance Powering
