SETTING UP THE REMOTE CONTROL
SETTING UP THE LAND & SEA TRUCK
2
1. Open the battery compartment of the remote controller by sliding the
cover down (Fig. 1).
2. Insert one 1x 9V battery (Fig. 2). Ensure it is inserted correctly,
matching the + & - symbols as indicated and replace cover (Fig. 3).
1. Locate the small battery compartment in the back of the truck’s cockpit.
2. Turn off the Land & Sea Truck by pushing the power button located on the
top of the truck.
3. Unscrew the two Phillips screws to open the battery compartment and
remove the rechargeable battery.
4. Connect the rechargeable battery pack to the charging adapter and plug
the adapter into a power outlet.
5. It takes approx. 3hrs to fully charge the battery. Once charging is complete
reinstall the battery, making sure to reinstall the two phillips screws.
Rechargeable battery pack
behind compartment door.
