CONTINUED »
PANASONIC LUMIX GH4
6.
SET INTERNAL RECORDING
MENU »
(5) » SYSTEM FREQUENCY » (59.94/50/24)
MENU »
(1) » REC QUALITY » (4K 100MB**/FHD 60/** FHD 30/FHD 24)
7.
SET HDMI OUTPUT
MENU »
(4) » HDMI REC OUTPUT » BIT MODE » (4:2:2 10-BIT*/4:2:2 8-BIT)
* Note when set to 4:2:2 10 bit, the camera will not record internally
**When wish to record 4K you must first plug into the odyssey to get the 4K output menu,
and ensure 4K Down Convert is OFF.
MENU »
(4) » HDMI REC OUTPUT » 4K DOWN CONVERT » OFF
8.
SET HDMI TIMECODE/CAMERA TRIGGER
Note: HDMI Timecode/Camera Trigger requires GH4 firmware version 2.1 or higher.
MENU »
(4) » TIMECODE (2) » HDMI TIME CODE OUTPUT » ON
This will output timecode to the Odyssey, which will be recorded with your video signal.
MENU »
(4) » HDMI REC OUTPUT » HDMI RECORDING CONTROL » ON
This allows you to start/stop recording on the Odyssey with the record button on the GH4.
9.
SET CLEAN HDMI OUTPUT
MENU »
(4) » HDMI REC OUTPUT » INFO DISPLAY » OFF
** Note that 4K and 1080p50/60p over HDMI is only supported on the 7Q+ 1080p50/60 is
supported on 7Q/7 with the use of a HDMI to SDI converter.
4
